FIBARO RGBW Controller
FIBARO RGBW Controller is a universal, Z-Wave compatible RGB/RGBW controller. FIBARO RGBW Controller uses PWM output signal, which enables it to control LED, RGB, RGBW strips, halogen lights and fans. Controlled devices may be powered by 12 or 24 VDC. In addition the device supports up to four, 0V – 10V analog sensors, such as temperature sensors, humidity sensors, wind sensors, air quality sensors, light sensors etc. All IN and OUT terminals may be user configured for LED control or 0V-10V signal readouts.
- Description
- Additional information
Description
FIBARO RGBW Controller is a universal, Z-Wave compatible RGB/RGBW controller. FIBARO RGBW Controller uses PWM output signal, which enables it to control LED, RGB, RGBW strips, halogen lights and fans. Controlled devices may be powered by 12 or 24 VDC. In addition the device supports up to four, 0V – 10V analog sensors, such as temperature sensors, humidity sensors, wind sensors, air quality sensors, light sensors etc. All IN and OUT terminals may be user configured for LED control or 0V-10V signal readouts.
Additional information
Dimensions | 42 × 37 × 17 mm |
---|---|
Power supply | 12/24V DC |
Rated output power | 6A for single output channel, combined 12A (sum of all connected output channels) |
PWM output frequency | 244Hz |
Electricity consumption | 0.3W |
Radio signal power | 1mW |
For installation in boxes | Ø≥50 mm |
Max load | at 12V – 144W combined, at 24V – 288W combined |
EU directive compliance | EMC 2004/108/EC, R&TTE 1999/5/EC, RoHS 2011/65/EU |
Radio protocol: | Z-Wave |
Radio frequency: | 868.4 MHz EU |
Radio transmit power | up to -1 dBm (EIRP) |
Range | (depending on terrain and building structure), up to 50m outdoors / up to 30m indoors |