Fibaro Flood Sensor
FIBARO Flood Sensor is a universal, Z-Wave compatible, flood and temperature sensor. Device can be battery or VDC powered. Flood alarm is sent to the Z-Wave network devices or additionally to any alarm system controller, through opening a NC contact.
The device has built in temperature sensor, monitoring temperature of e.g. floor. Flood Sensor is designed to be placed on the floor or on a wall with a flood sensor probe extended by connected wire. The device has built in visual LED indicator and acoustic alarm. LED diode signals flood, operating mode or the Z-Wave network communication range.
In addition, the sensor is equipped with a tilt sensor reporting tilt or movement to the main controller e.g. when someone has taken the Sensor from its original location.
FIBARO Flood Sensor is sink-proof, which means it drifts on the water surface and keeps on sending alarm signal in case of substantial inundation of water.
- Description
- Additional information
Description
FIBARO Flood Sensor is a universal, Z-Wave compatible, flood and temperature sensor. Device can be battery or VDC powered. Flood alarm is sent to the Z-Wave network devices or additionally to any alarm system controller, through opening a NC contact.
The device has built in temperature sensor, monitoring temperature of e.g. floor. Flood Sensor is designed to be placed on the floor or on a wall with a flood sensor probe extended by connected wire. The device has built in visual LED indicator and acoustic alarm. LED diode signals flood, operating mode or the Z-Wave network communication range.
In addition, the sensor is equipped with a tilt sensor reporting tilt or movement to the main controller e.g. when someone has taken the Sensor from its original location.
FIBARO Flood Sensor is sink-proof, which means it drifts on the water surface and keeps on sending alarm signal in case of substantial inundation of water.
Additional information
| Power supply | Battery or 12–24V DC supply (LPS or NEC class 2) |
|---|---|
| Battery type | CR123A/CR17345 battery, 3.0V DC |
| Electricity consumption | 0.4W |
| Output terminals maximum current carrying capacity: (ALARM NC, TAMP NC) | 25mA |
| EU directive compliance | RED 2014/53/EU, RoHS 2011/65/EU |
| Radio protocol: | Z-Wave, Z-Wave+ (firmware 3.2 or higher) |
| Radio frequency: | 868.4 MHz EU, 869.8 MHz EU |
| Radio transmit power | up to -5 dBm (EIRP) |
| Range | (depending on terrain and building structure), up to 40 m indoors (firmware 3.2 or higher), up to 50m outdoors / up to 30m indoors |
| Maximum voltage at output terminals: (SMOKE NC, TAMP NC) | 24V DC / 20V AC |
| Operational temperature | -20°C to 70°C – VDC powering mode, 0°C to 40°C – battery powering mode |
| Measured temperature range | -20°C to 100°C |
| Temperature measuring accuracy: | 0.5°C (within 0-55°C range) |
